Schematic representation of the fractionation procedure used to purify acidocalcisomes of Toxoplasma gondii tachyzoites. The 15,000 g pellet is applied in the middle layer of a 10-30% iodixanol. Branded by XTAR, the Sony VTC4 has a 2100mAh capacity with a huge 30 Amp discharge current which makes this battery perfect for use with your chosen Mechanical Mod and comes with a UK Ecig Store Battery Cover. Please Note: This product is no longer available. Please visit the accessories collection page to view similar.
The LG MJ1 model is INR18650MJ1. It is a rechargeable lithium ion battery, just like all other 18650 batteries we review on Battery Bro.
The MJ1 is new, that is why it is exciting. Every new generation of batteries provide just about an 8% increase in capacity (generalized) over those of the previous year. The MJ1 is certainly no exception, as it's nominal capacity is of the highest of all 18650 batteries on the market, and it achieves this without sacrificing much of its maximum discharge rating.
Let's take a look at its official specifications:
- Nominal capacity: 3500 mAh
- Minimum capaciy: 3400 mAh
- Average voltage over discharge: 3.635V
- Standard charge: .5C
- Maximum charge current: 1C
- Maximum discharge current: 10A
- Cycle life: 400 cycles
As you can see, the MJ1 really boasts a high capacity - 3500 mAh. A max. discharge current of 10A means the battery also can pack quite a punch. This is good news as it is proof that battery scientists have really started closing the gap between capacity and max. discharge rating.
Sony / Murata VTC4 Lithium Ion Rechargeable Battery Manufacturer Murata Model US18650VTC4 No. Sanyo NCR18650GA 3450mAh 10A Battery. Sony VTC4 mah 30Amp Flat Top Battery. Special Price $10.99. Discounted price $10.99. Regular Price $14.99. Actual price $14.99. The Sony VTC4 18650 battery offers a 2100mAh and 30A CDR rating. The user must have appropriate understanding of lithium ion batteries before purchase. Use caution when working with and using lithium ion batteries as they are very sensitive to charging characteristics and may explode, burn, or cau.
400 cycles is a good lifetime, and will mean these cells may be able to last up to two years or more depending on the application.
The capacity was tested under the following conditions:
- 23°C with a 2 degree error
- Charged up to 4.2V
- Charge current should be terminated when tapered to 50mA.
- Standard discharge current of .2C
- Cut-off voltage 2.50V
LG MJ1 testing conditions summary
The total safe voltage range for the LG MJ1 is between 2.50V and 4.20V. However, for many purposes it is best to recharge the battery before it discharges to 2.50V. Many people prefer to keep their lithium ion batteries charged above 3.0V.
For what it's worth, 23 degrees Celsius is a slightly lower than most optimal temperatures. Most 18650 batteries are tested at 25 degrees. Your temperature will effect your battery's performance, and the farther you deviate from the optimal temperature the greater the loss of efficiency and overall capacity. 18650 batteries should not exceed 60 - 70°C, and should not be charged when below freezing.
Charge tapering is what lithium-ion batteries do to get as high-voltage as possible, as safely as possible. To taper means to 'reduce towards the end' which is what a high-quality charger does when reaching a voltage close to 4.2. It gradually reduces the amount of current put in the battery as it reaches the end of a charge cycle. If you are still wondering what is charge tapering or if you want to learn more I recommend this short paper titled Battery Charger Termination Issues. by Texas Instruments. Most 18650 chargers on the market do not have great tapering, and as such charge termination suffers. This leads to a shorter battery life, and less capacity in the long-run.
The standard discharge current is .2C. To find out what this is in amps, take the nominal capacity (3.4Ah) and multiply it by the C (maximum safe discharge capacity, where C stands for capacity) rating. That is 3.4mAh multiplied by .2C = .68A. For those readers working on electric vehicles, this is the same discharge conditions as the Panasonic 18650B. You might think this testing condition is low, and you are right it is the minimal viable current draw, which is where capacity ratings come from.
However the MJ1 goes a step further and also defines testing conditions for high-drain and fast-charge conditions:
- Charge at 1,500mA to 4.20V (tapered end current 100mA)
- Standard discharge current of 4A
- Cut-off voltage of 2.50V
Letting the MJ1 rest
Something worth noting if you are using the MJ1 for high-drain and fast charge (which most of you will probably take advantage of) is that LG Chem recommends that cells are to rest 10 minutes after charge and 20 minutes after discharge. Take note of this if you are doing cycle-life tests.
Storing the batteries
Storing the batteries, whether in a bunker or a warehouse should be done their maximum voltage (4.2V) and charged as per the standard charging conditions I outlined above.
Vtc4 Dyson Battery Pack
Visually inspecting the MJ1 18650 battery
Take your battery and look at the top, sides, and bottom. Look for:
- Deep scratches
The color of the PVC I would call a standard green or shamrock green. No blue or yellow hue at all.
The bottom or negative terminal (pole) of this 18650 MJ1 battery. Not unlike most other unprotected 18650 cells - just flat, unfettered steel.
The metal positive terminal (pole) of 18650 batteries produced by LG Chem always have four connection points to the top cap.
Quality control codes on the steel case can be seen through the translucent PVC skin.
The max diameter of the MJ1, and my actual measurement are both 18.5mm.
The max. height of the MJ1 is 65.2mm, and my measurement of 65.4mm is acceptable because it is inside the range of error for these digital calipers.
How to rename batch files. Important! Don't do this with metal calipers as it may short-circuit your battery. If you use metal calipers, you must make sure to insulate the ends with something like electrical tape.
The approximate maximum weight is 49.0g. My weigh in does not exceed this so everything is good.
Testing the batteries in an environment a bit hotter than optimal. It will make a little difference to overall capacity (but not too much).
This is the first discharge test I ran at 2.50A discharge current and a cut-off voltage of 2.50V. Noitce that the capacity does not seem to meet the spec sheet, as it turns out to be 3307 mAh.
Here is the second test, with the same parameters as the first. The capacity readout is the same.
For the third and final test I used the amperage discharge which the battery was rated with (.68A). This test slightly exceeded the minimum capacity of the MJ1 which is set at 3400 mAh. Also note the increase in total energy as the voltage remains higher throughout a lower current discharge (12.21 Wh, about one watt hour more than the tests at 2.5A).
At the same time I can put a 1000mA pulse through the cell and get a reading of its resistance. A reading of 70mR is not bad, but this resistance is typically seen in high-capacity, low-drain cells. The higher resistance is one reason there is a decent loss of capacity in the higher-drain tests.
The MJ1 is definitely an exciting new cell for 2015. It will compete with the best Panasonic cells (like the G series) at the highest ever 3500 mAh. As we can see, my cell just barely meets this spec, and actually the cell's rating is closer to the minimum capacity of 3400 mAh. And that's in a minimum-drain situation. I feel that if given a full 10 amp discharge, the capacity would fall to 3200 mAh at this time.
I should also note this is a sample research cell sent to distributors like Battery Bro before it goes to market. The final production model should be even more polished and it should be given a second-look when that time comes in the next several weeks.