Ryobi 2 Cycle Weed Eater

Posted : admin On 17.08.2021

Start Right Here Find appliance parts, lawn & garden equipment parts, heating & cooling parts and more from the top brands in the industry here. Click on Shop Parts, or select the kind of product you're working with on the left and we'll help you find the right part. The Ryobi 2-Cycle Gas Power Head features a full crank engine for a two times longer lifespan as well as a Zip Start carburetor for easier starting. This power head accepts Ryobi Expand-It Universal Brand Fit attachments, simply attach an edger, a blower, or even a hedge trimmer to the power head and quickly move from project to project. Backed by a 3-year warranty, trust the Ryobi 2-Cycle Gas. If you own a Ryobi trimmer and wish to perform some regular maintenance work on it, you may want to check out this next video. In the tutorial, you find out how to clean a 2 cycle engine carburetor from the Ryobi trimmer using some simple pieces. It's not too difficult to do and can be really handy when you want to make sure your machine is working at optimal capability. So check out the video.

  1. Ryobi 4 Cycle Trimmer Problems
  2. Ryobi 2 Cycle Weed Eater Carburetor
  3. Ryobi 2 Cycle Weed Eater Carburetor
  4. Ryobi 2 Cycle Trimmer Head
  5. Ryobi 2 Cycle Expand It
  6. Ryobi 2 Cycle Weed Eater

Is your Ryobi 2 Cycle trimmer refusing to start? While Ryobi 2 cycle is one of the best trimmers out there for weeding and lawn maintenance, it can sometimes develop issues. Luckily, most problems are usually simple and you can fix them yourself.

We’ve created this guide to help you troubleshoot and fix your Ryobi 2 Cycle trimmer. Since there are several issues that may prevent the trimmer from starting, we have explained each of them and provided possible solutions.

Ryobi string trimmer troubleshooting: why your trimmer fails to start

These are the most common reasons why your new or old Ryobi trimmer stopped working:

  • Wrong starting procedure
  • Fuel issues – no fuel in the tank, clogged or broken fuel lines, clogged carburetor, etc.
  • Spark plug problems – damaged spark plug, clogged up dirt, covered with fuel or oil, etc.
  • Dirty air filters
  • Not mixing the oil or wrong mixing rations

How to fix a Ryobi 2 Cycle trimmer that won’t start

If your Ryobi trimmer is not starting or having issues picking up, we have highlighted 5 simple ways you can fix it.

1. Run the correct starting procedure

A Ryobi 2 cycle trimmer won’t start if you are running the wrong starting procedure. In fact, this is the most common reason for people who have experienced the problem before.

To solve the problem, this is how to start a Ryobi 2 cycle trimmer correctly:

  • Add correctly mixed gas and oil as not doing so can cause the trimmer to stop working. The correct mixing ratio is 1 gallon of gas and 2.6 ounces of two-cycle oil.
  • Press the “PRIME BULB” about seven to ten times to prime the engine
  • Set the choke to full position
  • Squeeze the throttle then pull the starter rope until the engine starts
  • Slide the choke to half position and allow the engine to warm for about 30 seconds

With the engine warm, the trimmer is ready for use. Return the choke to full position and start trimming your lawn.

2. Check the fuel lines

Why does my Ryobi 2 cycle engine stall when I give it gas? The most likely scenario is a problem with the fuel line. They may have clogged up due to dirt and debris.

Alternatively, the lines may be bent or broken due to wear and tear caused by exposure to the fuel.

To fix the lines:

  • Siphon the gas from the fuel tank.
  • Unscrew the rear cover of the trimmer then unscrew the carburetor from the engine to expose the lines.
  • If the filters are clogged or broken, disconnect them and replace them with new ones.
  • Attach the carburetor back to the engine then screw back the rear cover.

With the new fuel lines in place, you can try running the trimmer. Add fuel to the tank and follow the correct start procedure.

3. Check that the spark plug is working

If your fuel system working and the trimmer is still not starting? The problem is mostly in the ignition system.

You can troubleshoot the ignition by

  • Unplug the spark plug and check for any visible signs of damage.
  • Next, check for clogging or soaking with oil and clean.
  • If the issue persists, remove the spark plug and test for a spark. If you find one, the problem is not with the ignition. However, if there isn’t one, your spark plug is damaged, and you need to replace it.

With your ignition system fixed, you can now run the trimmer.

4. Clean the filters

Aside from fuel and the ignition systems, the next common area where a problem can arise is the air system. This usually occurs when the air filter clogs up.

The issue can be easily fixed by cleaning or replacing the air filter. To do this:

  • Unscrew the rear cover of the trimmer
  • Pull the filter away from the cover and check for dirt or debris.
  • Clean the filter by brushing away dirt and debris. If there is too much grime, wash it with hot water and liquid soap.
  • If there is too much damage, replace the filter with a new one.

With the filter now fixed, your trimmer should have enough air to start and run.

5. Adjust the carburetor

What if your trimmer starts then dies? What could be the issue? If it is turning off after pulling the throttle, the reason could be inadequate gas. In this case, adjusting your carburetor could fix the problem.

To adjust the carburetor:

  • Unscrew the rear cover and turn the trimmer so that the trimmer is facing upwards
  • Find two bolts located next to the choke slider.
  • Adjust the bolts one at a time, testing the trimmer after each adjustment

Once you have the desired engine run, screw back the cover and proceed with trimming. If this doesn’t work, you might need a replacement carburetor.


The above are some of the issues that might be affecting your Ryobi 2 trimmer and their solutions. Hopefully, you have now been able to fix the problem and continue trimming your lawn.

However, if the problem still persists, other factors could be in play, for example, a leak inside the engine. If this is the case, it is time to service your Ryobi trimmer – by taking it to a professional.

Related Guides

Sometimes a weed eater will start, and even idle just fine, but when you give it gas, it dies. This is often a sign that the engine is struggling to get sufficient amounts of either fuel or air. This article will give you some simple areas to check and explain the reasons why your small engine may be having trouble.

Why does my weed eater die when giving it gas? The most common causes of a weed eater dying when throttled are fuel issues, insufficient air intake, or problems with the exhaust.You should follow the path that the fuel travels to identify the issue.

Note that if your weed eater isn’t starting at all, that could be a different set of issues so be sure to read Gas Weed Eater Won’t Start: Causes and Steps to Troubleshoot.

Let’s get started with the troubleshooting process so that you can get back to your yard work.

Fuel Issues

When it comes to gas-powered weed eaters, the problem often lies with the quality and flow of fuel.

Let’s deal with the obvious first and get it out of the way.

First, make sure you have enough gas in the tank. I know, I know… it seems ridiculous. But we’ve all had that moment of frustration just to realize the tank had nothing but fumes. So check this.

If the tank has plenty of fuel, be sure the primer bulb is filling properly before you start the engine. Sometimes we forget to do this in the midst of working. Blame it on the heat!

And those primer bulbs tend to dry-rot and crack over time so make sure it’s not sucking in air when you depress it.

It’s also possible that the type or mixture of fuel you are using has caused an issue. Know this: Bad gas will sometimes allow a weed eater to start but once you try to rev the throttle, it dies.

As a rule, I strongly recommend using ethanol-free gas in your weed eater. Most manufacturers allow for up to 10% ethanol but it’s not worth the risk. Ethanol can really mess up a small engine.

Your best bet is to opt for a pre-mixed fuel like Husqvarna XP (link to Amazon). It’s ethanol-free, has a high octane rating, and has a much longer shelf life than a homemade fuel mix.

Ryobi 2 cycle weed eater carburetor

Commercial pre-mixed fuel also has the correct levels of fuel stabilizers and assures a precise gas-to-oil ratio for optimal small engine performance.

Fuel Filter

If you have been using a less-optimal fuel, it’s worth checking your fuel filter.

When a weed eater starts okay but dies when throttled, it often indicates that there is restricted fuel flow. A fuel filter can get clogged with impurities to a point that it allows a small amount of fuel through (enough for starting and even idling) but won’t let it through at a rate sufficient to rev up.

It’s worth checking this and cleaning the filter (or replacing it since they are so inexpensive). And if you do mix your own, make sure your two-stroke oil hasn’t gone bad. It doesn’t last forever like people think it does.

Air Filter

When the fuel has passed through the fuel filter, it enters the carburetor where it’s mixed with air. If your air filter is clogged, it will literally suffocate the engine when you rev the throttle.

Ryobi 4 Cycle Trimmer Problems

Depending on your model, it’s usually just a matter of turning a plastic knob or unscrewing a single screw to remove the air filter cover and gain access. Clean it or replace it depending on the type of filter it is. They are pretty cheap.

Checking the Carburetor

A carburetor is a component in gasoline engines. It ensures air and fuel work together to start a combustion engine. It is also one of the most frustrating parts of a small engine and a big reason that I’ve been seriously considering the benefits of moving to electric yard tools.

Although it’s a fairly simple mechanism, there are a number of things that can go wrong with a carburetor. However, since your weed eater is starting and only dies when giving it gas, that does help us to slim down the potential issues a little.

Now, the obvious issue that you need to check before we get technical is whether or not your carburetor is clogged. I’ve had great success with SeaFoam motor treatment (link to Amazon).

However, there are plenty of carburetor cleaning options on the market. The important thing to remember is to make sure the carb isn’t clogged before proceeding into the next, more technical steps.

Let’s look at these areas of your carburetor:

  1. The Idle Speed
  2. The Diaphragm
  3. The Metering Diaphragm

These are the most common culprits of a carburetor when a weed eater starts but stalls when throttling.

If you want to see this visually, Home Garage has an excellent walk-through video on YouTube that takes you through a lot of what we are going to cover:

1. The Idle Speed

Taking apart a carburetor on a weed eater can feel a little intimidating but it’s actually really simple; you will only need a screwdriver. The concern is with the gaskets. It’s generally best to purchase a carburetor rebuild kit prior to starting.

  • The first thing to do is to test the current idle speed of the weed eater. Since the engine turns off shortly after starting your weed eater, the idle speed may just be too slow.
  • Find the screw to adjust the idle speed. This is usually behind the air filter, but if you have trouble locating it, consult your user manual.
  • Adjust the screw using only ¼ turns before trying to start the trimmer again. This will ensure thorough troubleshooting.

If the weed eater starts up without issue and stays on when you rev the throttle, you have fixed the problem.

Ryobi 2 Cycle Weed Eater Carburetor

On the other hand, if your trimmer starts up, but the engine sounds erratic, you should take apart the carburetor to investigate further. Be sure you drain any fuel from the tank to prevent leaking in later steps!

2. The Diaphragm

Inside one side of the carburetor, there is a diaphragm--a small plastic piece with small flaps--which is what we will focus on during this part of the troubleshooting process.

Ryobi 2 Cycle Weed Eater Carburetor

If the flaps of the diaphragm are bent or worn out, you can replace these easily. You can find the specifications for the diaphragm repair kit in the user manual. Remember you can also find user manuals on the manufacturer’s website in many cases!

You can find carburetor repair kits (link to Amazon) that include diaphragms in hardware stores or dealer service centers as well as online marketplaces. Just search for the make and model you need.

These diaphragms are easy to replace yourself. Simply place the diaphragm flat in the small recess of the carburetor and reassemble the device with the screws you took out earlier.

If this doesn’t remedy your problem, be sure to check out the other side of the carburetor, which we will cover next.

3. The Metering Diaphragm

On the opposite side of the carburetor, there is another set of screws. Unscrew them to assess the condition of the metering diaphragm. This part helps regulate engine speed and should be the consistency of a cotton T-shirt.

This video from The Repair Specialist is a great illustration of the function of the metering diaphragm:

Ryobi 2 Cycle Trimmer Head

If you find the metering diaphragm is worn out--or even worn through entirely--it will need to be replaced. Once you are done, reassemble the carburetor and test your weed eater.

Strategies for a happy life Find out more about how to be happy in Dr. Sharp’s “The Happiness Handbook” (Finch, 2005). In 10 chapters, Dr. Sharp addresses: 1. Planning for happiness 2. Making yourself happy 3. Using your strengths to be happy 4. Relationships and happiness 5. Thinking optimistically 6. Managing your resources 7. Weekly news and notesteach to be happy birthday. Say YES and join our Tribe Today! We set our default setting to being Happy. You can not hold onto Happy - life happens - But! You can set your default setting to being happy. Happy Week: Happiness Tactics September 18, 2009 / 1:51 AM / CBS If you go to the book store, it seems as though there's a how-to book for everything from dieting to pet care to building furniture.

Clogged Exhaust

This is one of those overlooked areas that make you slap your forehead when you think of it. We tend to focus so much on the fuel and air coming in that we forget the possibility that the problem may be with the air getting out.

Ryobi 2 Cycle Expand It

I ran across this YouTube video on clogged exhaust problems last fall when a friend and I were working on his weed eater and couldn’t find the issue. Take a few minutes to watch this:

Regular Maintenance

Regular maintenance is important for any piece of lawn care equipment. Maintaining the weed eater will ensure it lasts for years to come and won’t break down when you need it most—or in the middle of working.

Ryobi 2 Cycle Weed Eater

Make sure you clean the unit carefully after each job. You can use a damp towel to get any excess grass or debris off. This will prevent rust and issues with buildup.

In addition to wiping the trimmer, a good rule of thumb is to check each of these parts at the end of the season:

  • The fuel tank should be free of leaks and filled with quality ethanol-free fuel.
  • The fuel filter should be free of impurities.
  • The air filter should be clean and porous.
  • The carburetor components should be in working order.
  • The exhaust should be free of debris.

Checking these parts at the end of the season ensures you can jump right into lawncare come springtime!