Reinstall Mysql On Mac

Posted : admin On 14.08.2021
  1. Hen you feel that your Windows 10 PC is running erroneously or is lagging and slow, and you have ran out of ideas to fix the system, Windows 10 has a built-in feature which allows user to refresh and reset the system to fresh, clean and original OOBE (out-of-box experience) factory defaults state.
  2. It’s possible to revert the uninstallation process and reinstall U3 Launchpad into the USB flash smart drive. The reinstallation of U3 Launchpad software and feature-set to U3 smart driver is manufacturer’s dependent process, where you need to download U3 LaunchPad Installer or Updater that will install or update the U3 Launchpad in the.
  3. So, connect the affected Mac to a functional Mac via Target Disk Mode, install Stellar Data Recovery Professional software on this working Mac, and then run it on the affected hard drive to extract and backup all the data to a secure location. Once the data is backed up, reinstall the macOS on the drive to fix the flashing folder with a.

Reinstall macOS Using macOS Recovery Mode. As a last resort, back up your Mac then reinstall macOS to fix MacBook Pro booting issues. Steps are as follows: Step i) Restart the MacBook Pro and press-hold Command + R keys until the Apple logo appears. Step ii) From the macOS Utilities window, select Reinstall macOS, and press Continue.

Summary: This blog offers one of the best solutions for resolving a flashing question mark (?) folder problem on Mac screen.
And while you deal with this problem, you may face data loss situation due to corruption or inaccessible media. So, we also cover along data recovery solution for Mac hard drives.
Do you know Stellar Data Recovery Professional recovers data from a non-booting Mac as well? Free download to know more.


When I turned on my MacBook Pro, a flashing folder with a question mark came on the screen. That stayed there for a few seconds, but the Mac booted later on. Is there an issue with my MacBook Pro? Any suggestions…

Yesterday, after I turned on my MacBook Air, it displayed a flashing folder with a question mark. It didn’t boot so I had to force shut down. Then on, I didn’t start the MacBook. I don’t know what’s going on. Any clues on how to fix this?

In this blog, we will help you resolve the problem of ‘flashing folder with a question mark sign’ on your MacBook or iMac. And while you deal with this problem, you may come across the possibilities of data loss due to corruption or inaccessible media. So, we also cover along data recovery solution for Mac hard drives.

Let’s begin with the reasons for— why your Mac is flashing a question mark folder?

Flashing folder with a question mark (?) errormay occur if the Mac cannot detect its boot directory. This can happen in the following situations:

  • Mac cannot find the Startup Disk i.e. Macintosh HD
  • The macOS is corrupt

How to Repair Mac Flashing Question Mark Folder?

Following are the scenarios you would face in the ‘MacBook flashing folder question mark’ situation, along with the solutions you can use to tackle them:

Case 1: When MacBook displays the error for a few seconds but boots

Step 1: Go to Apple menu > SystemPreferences > StartupDisk.

Step 2: Click the icon of the Startup Disk that is generally named as MacintoshHD.

Step 3: Click Restart; your Mac won’t display flashing folder with question mark again

Case 2: When MacBook displays the error but does not boot.

A) Force Shutdown and Enter macOS Recovery Mode

Step 1: Press & hold the power button for a few seconds to force shut down the MacBook.

Step 2: Power on the Mac and immediately press & hold Command + R keys until Apple logo, spinning globe, or firmware password prompt appears.

a) When prompted, select a Wi-Fi network. You’ve entered into macOS recovery mode.

Step 3: When macOS Utilities appears, go to Apple menu > StartupDisk.

Step 4:Click the Startup Disk (Macintosh HD), and then click Restart.

If the Startup Disk icon is not visible in the Startup Disk window, then likely the Startup Disk is facing a problem. Try repairing it with First Aid, as follow:

B) Repair Startup Disk

Step 1: In the macOS recovery mode, go to macOS Utilities and click DiskUtility.

Step 2: From the left pane, select the Startup Disk (MacintoshHD).

Step 3: Click the First Aid tab and then click the RepairDisk button.

Step 4: Exit DiskUtility once the repair process is over.

Step 5: Go to Apple menu > Startup Disk then select the Startup Disk (Macintosh HD) and Restart.

If the Startup Disk is still not visible after repair, then you would need to reinstall macOS to solve the ‘Flashing Folder with a Question Mark’ problem.

Also Read: 8 Best Ways to Recover a Failed Internal Mac Hard Drive

C) Recover Data from macOS

Step 1: Back up the MacBook data [critical step]

This is critically important because if you reinstall the OS without first backing up the data, it will result in data loss due to overwriting. So, back up the data present in the Startup Disk to another functional Mac (Target Disk Mode), as follows:

Step I. Connect the Mac that has flashing question mark to another Mac via Target Disk Mode.

Step II. Easily get the Stellar’s data recovery software from the below:

Step III. Install Stellar Data Recovery Professional for Mac on the working Mac.

Step IV. Launch the tool, and from the main interface, select RecoverData.

Step V. Select the type of data and the location of the flashing question mark drive.

Step VI. Click Scan after you turn on the DeepScan feature for rigorous searching.

Step VII. Click Recover, and on the dialog box, specify the save location and click Save. The ‘save’ location can be the working Mac’s internal drive if it has sufficient space or else another external drive.

For quick walkthrough on how to use the software for MacBook data backup, see the following video:

Step2: macOS Reinstallation

Afterthe data stored on the HD – having flashing question mark folder problem – isbacked up, proceed with reinstalling macOS, as follows:

  1. In the macOS Recovery mode, go to macOS Utilities and click Reinstall macOS.
  2. Click Continue then select Macintosh HD (Note: You have already done the Mac data recovery to an external storage drive.)
  3. Erase Macintosh HD and execute the on-screen steps to reinstall macOS. Once the installation is over, Mac automatically restarts and boots from the Startup Disk.
  4. In Setup Assistant, migrate your data from the source disk (i.e. external storage/HD of the functional Mac) to the internal Mac drive.

Gps for cat. Note: When Disk Utility does not show the Startup Disk or cannot repair it, then the storage drive has hardware problems. Contact a Mac repair service provider in this scenario.

Conclusion

The article elaborated various methodsto repair flashing question mark folder screen on Mac. The first case occurs when your Mac shows a flashing folder with a question mark for a few seconds. In this case, you reselect the Startup Disk fromsystem preferences.

Thesecond case happens whenyour Mac is stuck in the flashing folder with a question mark without booting.In this case, you need to enter the macOS recovery mode and reselect the StartupDisk. If it’s not visible, then try repairing it with Disk Utility.

If the Startup Disk repair fails, thenyou would need to reinstall macOS to overcome this problem. But, before that,it’s critical to back up the data stored on this hard drive, as reinstallingmacOS will simply overwrite the existing data.

So, connect the affected Mac to a functional Mac via Target Disk Mode, install Stellar Data Recovery Professional software on this working Mac, and then run it on the affected hard drive to extract and backup all the data to a secure location. Once the data is backed up, reinstall the macOS on the drive to fix the flashing folder with a question mark issue on Mac.

Summary: The blog speaks about the MacBook Pro booting process, getting stuck halfway and also shares various ways to troubleshoot the Mac and recover data from it. Before you set out, don’t forget to download and install the free trial of Stellar Data Recovery Professional for Mac, which is only a click away.


Table of Content1. Listen to Your MacBook Pro’s Start-Up Tones
2. Start your MacBook Pro in Safe Mode
3. Repair Mac Storage Drive using Disk Utility
4. Reset Your MacBook Pro’s NVRAM/PRAM
5. Reinstall macOS using macOS Recovery Mode
6Install mysql on mac big sur. Create a Recovery Drive for MacBook Pro & Recover Data

MacBook Pro users seldom need to troubleshoot their system as the probability of encountering any issue in Mac is minimal. But there are instances when users experience specific problems, and MacBook Pro booting stuck halfway or not booting is one of them.

Fortunately, several start-up options can help get your MacBook Pro up and running again. Also, some of the steps mentioned in this guide may erase all your data. So, before you proceed, back up your files, else a MacBook Pro data recovery software will be the last resort.

In the next section, we’ll describe various troubleshooting methods to resolve the MacBook Pro booting stuck halfway issue and recover data from it.

1. Listen to Your MacBook Pro’s Start-Up Tones

The sound when your MacBook Pro starts tells a lot about its condition. Try to listen to the sound your MacBook Pro makes when it boots. Here’s what your MacBook Pro’s start-up tones mean:

Note: Models earlier than 2016 make a chime sound. Good news, the upcoming macOS Big Sur will bring back the start-up chime.

2. Start your MacBook Pro in Safe Mode

Restarting your MacBook in Safe Mode might resolve the Mac issues as it prevents applications from loading automatically and repairs directory issues and deleted system cache files. To start up your MacBook Pro in Safe Mode, perform the following steps:

Step i) Restart your MacBook Pro and immediately press and hold the SHIFT key.

Step ii) Release the key when the login window appears. Enter the correct credentials to log in.

Step iii) Reboot your MacBook Pro and resolve the MacBook Pro not booting issue.

When your MacBook Pro shuts down, hangs, or restarts in Safe Mode, then repair the Mac storage drive using Disk Utility.

3. Repair Mac Storage Drive Using Disk Utility

Disk Utility enables or disables journaling, verifies disk integrity, and repairs your Mac disk if it’s damaged. To run Disk Utility, follow these steps:

Step i) Restart MacBook Pro and press-hold Command + R keys until the Apple logo appears.

Step ii) In the macOS Utilities windows, select Disk Utility, then click Continue to launch the app.

Step iii) In the right-panel, select the Mac drive and click the First Aid tab to repair it.

Note: If Disk Utility reports that your Mac hard drive is about to fail, immediately back it up.

4. Reset Your MacBook Pro’s NVRAM/PRAM

Sometimes your MacBook Pro’s Non-Volatile RAM (NVRAM) or Parameter RAM (PRAM) experiences glitches that can cause booting issues. Both RAMs store information that your MacBook Pro needs to load the macOS. To reset your NVRAM/PRAM, follow these steps:

Install Mysql On Mac Big Sur

Step i) Restart your MacBook Pro and immediately press Command + Option + P + R keys.

Step ii) Hold this key combination until your MacBook Pro boots up again. The RAMs get reset.

If resetting of the NVRAM/PRARM doesn’t fix the booting issue, try reinstalling your macOS.

5. Reinstall macOS Using macOS Recovery Mode

As a last resort, back up your Mac then reinstall macOS to fix MacBook Pro booting issues. Steps are as follows:

Install Mysql On Mac High Sierra

Step i) Restart the MacBook Pro and press-hold Command + R keys until the Apple logo appears.

Step ii) From the macOS Utilities window, select Reinstall macOS, and press Continue.

Step iii) Follow the onscreen instructions and reinstall a new version of macOS.

Note:You can restore your system from a Time Machine Backup of your MacBook Pro or an external hard drive.

6. Create a Recovery Drive for MacBook Pro & Recover Data

Install Mysql On Mac Catalina

Professional data recovery software for Mac and MacBook Pro comes handy when you don’t have a backup to restore your lost data. So, it is always good to have an updated backup of your files; else, a Mac data recovery software is your last resort.

Stellar Data Recovery Professional for Mac is one such software that you can count on to bring back your lost data. This software supports the latest and the older MacBook Pro models and various file types, external hard drives, and SSDs. Download the trial software from here.

Also, watch the following video to learn how to create a bootable media by using the software.

Note: This solution won’t fix the “MacBook Pro not booting” issue, but is beneficial to retrieve your lost data in the absence of backup.

Reinstall Mysql On Mac Virtualbox

Conclusion

Reinstall Mysql On Mac Os

To get your MacBook Pro up and running, implement the solutions mentioned above but make sure that you have a valid backup file. If the problem persists, consult an expert or visit the nearest Apple Store.